One of the theories in layout construction is that you only want the viewer to see one scene at a time as they look at the trains. That places the train, then, in some sort of context with the landscape around it. As you have seen in all my pictures, you can see the entire room to this point. So, now I have to divide the room into discrete scenes. This is the beginning of that exercise. I have built a half stud wall that will be faced with a sandwich of Masonite and plastic to form that wall. This shows the curved ending to the wall where the main line will disappear into a tunnel on the lower level. On top of the wall, the tracks hanging from the ceiling form the sky. You can see in this view that the walls diverge with the front one ending, and the rear one starting to proceed to the left.
This is a view that shows the rear wall moving left along the railroad yard while the right wall curves out to the end of the benchwork and stops. I have purchased 14 sheets of Masonite for the wall backer. I plan to build more stud walls before I hang that material. Key to this exercise is to get the wall vertical and have the curves smooth so I can bend the material without problems and without having the backer climbing up the studs (if it is not vertical). Thus it will take time.
This is a view from the entrance to the yard, of how the wall will appear as it rises up to the bottom of the structure that holds the 6 overhead tracks. I had to build this first to hold the wiring that drops down from the overhead tracks to a control panel that I have to build about where I am standing. You can see the red wire dropping down in the background. So, I will probably stop this as I do some wiring.
No comments:
Post a Comment