PRR - Northern Central

Here are the completed cars sitting in the yard awaiting weathering.   The first three are 8000 gallon cars that required the frame milling....

Well, now we need project box number two to use as a base for an old product called a RixRax hand held throttle with a long tether. So, I to...

Well, I need a turnout motor power supply for the mine and Shamokin complex. I used 3 volt Switchmaster like high torque motors in RixRack m...

As you all know, Atlas has reissued the Intermountain tank cars with diecast frames and their trucks and couplers. These are nice cars but t...

Well, the track plan has been decided on and now I am gluing the switch ties down to allow the passing siding from the main to the factory t...

When trying to make the headlight lens for the RS 1, which is 1/4 inch in diameter, I found that the leather punch I was going to use put a ...

Previously, I had added canvas shades to a GP9. The Alco RS1 also had canvas shades so I had to do another engine. You have seen earlier pho...